Pro Race Axle Package, 40 Spline Gun Drilled (7/8" I.D.) Axles, Round Lightning Holes, Axle Bearings/ 5/8" Bolt Kit, 17.00", 13.00" (26" Housing), Dual Pattern, 5 x 4-3/4" & 5 x 5"

Pro Race Axle Package, 40 Spline Gun Drilled (7/8" I.D.) Axles, Round Lightning Holes, Axle Bearings/ 5/8" Bolt Kit, 17.00", 13.00" (26" Housing), Dual Pattern, 5 x 4-3/4" & 5 x 5"

*PLEASE CALL US TO CONFIRM MEASUREMENTS AND SPECIFICATIONS BEFORE ORDERING THIS PRODUCT! WE WANT TO MAKE SURE EVERYTHING WILL WORK FOR YOUR APPLICATION! KEEP IN MIND WE CAN ORDER CUSTOM AXLES FOR ANY APPLICATION OR NEED IF YOU DO NOT SEE ONE THAT WILL WORK FOR YOU!

Designed Specifically For Drag Racing
Thru-hardening maximizes the torsional strength of Hy-Tuf axles
This also reduces the flexibility necessary for street driving

Alloy Axles are Unavailable in 40 Spline

Requires
• Ford 9″ or Dana 60 with 3.150″ housing ends
• Ford 9″ using Strange 3.250″ or 3.812″ bore case

Weight Reduction
Gun-drilling removes approximately one pound per foot
Five lightening holes remove .4 lbs per axle

Includes

Hy-Tuf Ultra Strength Gun-Drilled Axles – A2000
• Forged from high nickel, molybdenum and chromium steel
• Increases torsional strength and material toughness
• Manganese added to improve hardness consistency
• Majority of machining performed before heat treat
• .875″ I.D. hole bored entire length of axle
• Five 1″ lightening holes
• Thru hardened to Rc 45-48
• Finish machined after heat treat
• Includes full length of shaft to ensure trueness
• Black oxide finish resists corrosion
• Choice of bolt circle
• Forged in the USA
• Designed and machined by Strange Engineering

Sealed Ball Bearings – A1019
• Low friction bearings designed specifically for Drag Racing
• Large I.D. to accept 40 spline axle
• Race O.D. grooved for O-ring to eliminate inner axle seal
• Includes O-rings and locking collars

Choice of 5/8″-18 Stud Kit

Bolt Style Stud Kit – A1027 / A1027S / A1027L
• 5/8″-18 x 3″ Grade 8 fully threaded bolts *
• Thin .200″ hex head provides additional clearance
• Part number suffix determines width of aluminum washers
• No suffix = .4375″ / S = .250″ / L = .688″
• Includes threaded sleeves, installation tool & flanged lug nuts

* Length measured from underneath the hex of the stud

Shank Style – A1036 / A1037 / A1037MD / A1038 / A1039 / A1041
• 5/8″-18 chrome moly stud available in six different shank lengths
• Part number suffix determines width of aluminum washers
• No suffix = .4375″ / S = .250″ / L = .688″
• Includes thin head self locking inner nuts & flanged lug nuts

*FOR CUSTOMER SAFETY AND ACCURACY PLEASE ENSURE SHIPPING AND BILLING ADDRESS BOTH MATCH UPON CHECKING OUT! WE CAN ONLY SHIP TO THE BILLING ADDRESS ON THE CARD USED FOR PAYMENT! THANK YOU!